Cable lugs 16mm2 M5 20 pcs ring lugs press lugs

• Suitable for cable cross-section: 16 mm²
• Diameter of the screw opening: 5 mm
• Cable entry inside diameter: 5.8 mm
• Cable entry outside diameter: 8.0 mm
• von eXODA Nr.: A3-M5 EAN: 4260488412795

These cable lugs are among our most popular. That is why we offer the 16mm2 tubular cable lug as a pack of 20. A tubular cable lug of the finest quality, the tubular cable lug is annealed and electrically tinned. Therefore they can also be soldered. The 3μm thick layer makes this possible. The cable lugs can be with you quickly from stock. A cable lug as it should be! The receptacles are chamfered, which makes it easier to insert the copper wire strands. The low resistance with good crimping ensures high conductivity. This is what makes a good cable lug. A tubular cable lug should be stable and flexible at the same time. The cross-sections for cables are often only nominal cross-sections. This means that because of the better conductivity of cables nowadays, copper is often dispensed with. This makes the total cross-section smaller and thus increases the demands on the cable lug. With the eXODA tubular cable lug, nevertheless, a proper crimping is possible even under difficult conditions. The cable cross-section 16 mm2 results in a converted diameter of 4.5mm.